Glass balustrade prices are quoted per linear metre, but two runs of the same length can differ in price by a factor of two. Below are realistic price ranges for the main types of glass balustrade, the things that push the cost up or down, and what to have ready so a quote for a property in Stoke On Trent is accurate first time.
The figures below are rough guides for supply and installation. They assume straightforward access and standard toughened laminated glass. Your quote will depend on the site, the glass specification and how much of the work is bespoke. Treat them as a starting point and not a fixed price.
Stairs usually cost more per metre than a level run. Each panel on a stair has to be cut to the rake, so no two are quite the same, and the fixings on the stringer or treads take longer to set out.
The glass is often less than half the price. Most of the cost sits in the fixings, in the structure the balustrade fixes to, and in the labour of measuring and fitting it accurately.
Any glass balustrade that guards a drop has to meet Approved Document K. In houses, guarding on stairs and internal landings is usually at least 900mm high, and on external balconies and edges at least 1100mm. In commercial and public buildings 1100mm is common throughout. Gaps must be small enough that a 100mm sphere can't pass through.
The balustrade must also withstand the right horizontal load for how the space is used. A busy showroom mezzanine is designed to a higher load than a domestic landing. That affects the glass thickness and the fixings, and so the price. If a quote seems far lower than others, check that it uses laminated safety glass and a fixing method rated for your use.
Stoke On Trent falls within the Midlands area we cover from our Chesterfield base. Our site surveys and quotes are free. Before the survey, it helps to have the approximate run lengths, photos of the floor or deck edge, and any architect's drawings. We can make to your drawings or design the balustrade ourselves, and we can produce 3D illustrations so you can approve the design before anything is made.
For a quick early figure, our website has a guide-price calculator for glass balustrades that takes Part K into account. Builders and architects can use it to check costs at the design stage. Homeowners can use it to see whether posts or a frameless system fits their budget before booking a survey.
Usually yes. Frameless systems need thicker laminated glass and a structural base channel, so they often cost noticeably more per metre. In return you get an uninterrupted view, which is why they are popular for decking and terraces.
Often it can, but only if the joists and their fixings can take the loads the balustrade has to resist. If they can't, they need strengthening, or a steel-frame deck may be the better long-term choice.
Fitting a typical domestic landing or deck often takes one to three days. The glass is usually made to measure after the survey, though, so allow a lead time of a few weeks between survey and installation.
Tell us what you have in mind and we’ll come and measure up. Free quotations across Derbyshire, Yorkshire and the Midlands.
Call usSend a few details and we’ll get back to you to arrange a site survey. Domestic and commercial enquiries welcome.